5 Star Xtreme Urethane Auto Paint Kit – Allis Chalmers Orange – 8014

Description

5 STAR XTREME AUTOBODY PRODUCTS

TECHNICAL DATA INFORMATION

DATED: AUGUST 2012_REVISED

PRODUCT DESCRIPTION:

5 STAR XTREME #8000 Series 2.8 VOC Acrylic Urethane Colors are high solids, high gloss, low VOC coatings intended for use as a protective maintenance coating for automotive and industrial applications, surfaces exposed to humidity, chemicals and corrosive elements.

PLEASE SHAKE AND STIR ALL PRODUCTS THOROUGHLY

#8000 SERIES CUSTOM COLOR/CATALYST:

HIGH PERFORMANCE URETHANE SINGLE STAGE SERIES 2.8 VOC – GALLON

#8000-01 Gloss Black

#8001-01 Hot Rod Black

#8002-01 Brilliant Black Pearl

#8003-01 Gloss White

#8004-01 Fleet White

#8005-01 Pure White

#8007-01 Oxford White

#8008-01 Charcoal Mist Metallic

#8009-01 Galaxy Silver

#8010-01 Viper Red

#8011-01 Swift Red

#8012-01 Candy Apple Red

#8013-01 International Harvester Red

#8014-01 Allis Chalmers Orange

#8015-01 New Cat Yellow

#8016-01 School Bus Yellow

#8017-01 John Deere Yellow

#8018-01 John Deere Green

#8019-01 Ford Blue

HIGH PERFORMANCE URETHANE SINGLE STAGE SERIES 2.8 VOC -QUART

#8030-04 Premium Low VOC Reducer

#8040-04 2.8 VOC High Performance Urethane Paint Catalyst

DIRECT TO METAL ADHESION

NOTE: Performance is better when using DTM Primer under #8000 series paint.

POT LIFE

Pot life will be about 3-5 hours at 77° F.

MIXING DIRECTIONS (4:1:1):

2.8 VOC

4 PARTS #8000 Series Single Stage

1 PART #8040 Catalyst

1 PART #8030 Reducer or quality grade Low VOC urethane reducer

SURFACE PREPARATION:

1. Wash area thoroughly with soap and water to remove contaminates that solvent based cleaners cannot remove effectively. 2. Clean area with Wax and Grease Remover. 3. Use a tack cloth to remove any surface contaminants that may have settled on the repaired areas prior to paint application. 4. Apply #8000 series High Performance Urethane Single Stage Color.

APPLICATION DIRECTIONS:

Adjust air pressure to 40-50 psi at gun for gravity, siphon feed guns or HVLP use 6-10 psi at air cap. Apply 2-3 medium coats (maximum 2 mils wet per coat) or until hiding is achieved. Allow a 15-20 minute flash time between coats and before force drying.

DRY TIMES AT 77°F:

FLASH TIME 15-20 MINUTES

TO DELIVER 16-24 HOURS

FORCE DRYING AT 140°F:

PURGE TIME 15 MINUTES

BAKE TIME AT 140°F 40 MINUTES

RECOATING:

2.8 VOC XTREME #8000 Urethane Single Stage Color may be recoated after 16-24 hours at 77° F. After 16-24 hours it must be lightly sanded/scuffed before additional color or clearcoat may be applied.

ACCELERATOR & FISHEYE ELIMINATOR:

Accelerator and/or Fisheye Eliminator is not recommended for use in this product.

CLEAN-UP:

Clean spray equipment immediately after use with 5 STAR XTREME Gun Wash, or a high quality lacquer thinner, or compliant solvent depending on area regulations.

TECHNICAL DATA:

Color: Various

Catalyst: #8040

Low VOC Reducer: #8030

Mixing Ratio (2.8 VOC): 4:1:1

Weight Solids (RTS): 52 – 70%

Viscosity #2 Zahn (RTS): ____________________ 18 – 28 seconds #2 Zahn

Pot Life: 3-5 hours

Film Build per coat: _________________________ 1.0-2.0 mils per full wet coat

Coverage: 850 sq.ft. per gallon @ 1 dry mil

Disposal/Safety: ____________________________ See MSDS for this product