Mini Cart

Several automobiles on the street now have a dual-type of stage paintwork that is inexpensive, manufacturer-direct, and weak on the transparent finish and much shallower below. The preexisting slim coat on the car combined with harmful Ultra Violet radiation, water pollution, and many other pollutants cause ageing, corrosion, and scaling in paint that appears like flaking skins after a severe tan.

Could there be a way to tell whether your automobile paint needs to be replaced? That’s exactly what we’ll learn more about today. There are various indicators that you should look for.  In today’s post, we’ll look at the best 3 indications that indicate whether it’s time to make a move for your car or get a quote from a local manufacturing area.

Fading Can Be Fatal

An outer layer that really has begun to decompose is by far the most common indicator of aging. The shine you perceive when a non-wax kind of paint is applied comes from the transparent layer. It works as an objective lens for amplification to draw out the depth of the color below. The paintwork starts to lose shine or sparkle when the clear pigment starts to fade.

Begin by comparing old and new photos of your car

One of the best ways to determine when your car needs new paintwork is with your own two eyes. It may sound a bit obvious but looking at older and newer pictures of your car will certainly help you notice a major difference in the paint color. Since ageing is a slow process and you see your car on a daily basis, it is common for you to miss out on this clear indicator.

Once you’ve compared older pictures with newer pictures, you also might want to take a look at references by taking a look at other cars. You can alternatively even look for the average life of paintwork on your new car or show it to a paint specialist who can guide you through the process.

Do You Have a Bad Peeling?

After some wear and tear and a few years, peeling is not uncommon to occur. You will probably mistake peeling for the removal of the paint coat itself but once the clear coating has worn off and has no paint protection to cover it, it can come off in the form of peeling. This degradation is not good for your car and you may even witness the surface losing its color with additional wear and tear.

Here are some telltale indications that your outer layer is peeling.

Bubbling

If you find blotches on the paintwork that appear like air pockets in the color, this seems to be an indication that perhaps the clear covering has now been compromised. The bursting is usually caused by oxidation rising beneath both clear and paint layers.

Discoloration

The discoloration of the painting would be another sign of a defective protective layer that may simply remove. Whenever you see patches or regions of degradation on your exterior, you should know that it is time to act. This one is generally a sign of inconsistent clear coats or deterioration towards the paintwork on its own in high density areas.

Save a Scratch in Time or Save 9

A procedure known as “paint correction” could be used to restore exterior scratches. Treatment entails slicing through into a protective layer with a polished chopping chemical containing fine-abrasive elements until the damage is gone. It essentially evens out the paintwork to the extent where another blemish has become buried.

There is always a chance that oxidation issues might arise if indeed the nick is deep and has additionally penetrated the transparent covering. The mechanism that causes rusting to form is called oxidation. Whenever the metal reacts with oxygen and moisture, it begins to corrode. It’s quite tough to fix the damage that penetrates through the painting.

Conclusion

There are various ways of knowing whether your car could use a new paint job or not but these three will guide you just right as well. It is important to pay attention to the minor details and to get a paint job done where the requirement arises. This way, your car can stay shiny and healthy for long.

Further Reading:

Contemplating purchasing a car can be a tedious process with all the things that you have to keep in mind. You never want to compromise on anything and yet your budget won’t allow you the perfect exterior, tyres, engine, bodywork etc.

But there’s always some squeeze room in your budget. If this room isn’t used to splurge a little more on the perfect color, why have squeeze room at all? The perfect color makes the perfect statement to the world about who you are. So why not invest a few bucks extra for one of these wild colors to give your car that extra bit of personality to define you?

Burst Blue Metallic

Not many colors can manage to be simple and bold at the same time but the Burst Blue Metallic designed for Volvo V60, XC40 and XC60 has a certain peculiarity to it.

On the outside, it’s a minimalistic tone that would ideally pass under the radar but the glossy finish and the striking exterior black accents instantly draw your attention. The color isn’t too flashy either as the hue is cool and easy on the eyes.

Frozen Berry Metallic

The Porsche Taycan came out as competition to Tesla in the electric market in the most interesting way. The Frozen berry metallic is a color that really paints quite the picture with its name.

In the intrinsic details, you can even see the rich blend of hues which is probably why this color was named after a rich smoothie too. It’s an offbeat color with a new beat car. Just perfect for your new car paint color change.

Two-Tone Monarch Orange & Super Black

Both, Nissan Kicks and Centra come in this sporty country style color combination that combines a rich orange with a classy finish. This is indeed quite different from Nissan’s usual bunch and the two-tone quality of the car paint color really sets it apart.

A black roof can give your sedan a whole new feel to it and more importantly, put it in a light that people have never seen it in before.

China Blue Metallic

The Mercedes G series has certainly had some distinctive colors that have made their mark but looking at this pale blue hits you entirely different. Given the type of car, a rough and rugged look compliments the sharp finish very well. The color is ideally suited to your station wagons with a tough look.

Soul Red Crystal Metallic

When you look at the beautiful red color launched by Mazda, you understand why all of its 2021 models feature this one. For a simple price of around 500$, you can upgrade your new Mazda ride to a silky smooth looking color with shiny overtones.

Chroma Molten Gold

When you spot a Lincoln Navigator in the Chroma Molten Gold, you just know that it’s a Navigator. This smooth gold dripping color ensures that the car does not look like one of your everyday SUV’s that cruise around in their metallic black hues. Instead, this color sets itself up for a stylish and sleek look every time.

Spectral British Racing Green

Watching a Range Rover in the same green tint that was used in century-old racing cars is very satisfying. What makes this blast from the past even better is that you get to see these colors in the turquoise appeal of Chromaflare that changes the color as the sun changes its shine on your ride.

Velocity Blue

Jaguar has been more famous for their delightful Sedans for a while now but this beautiful F model sports coupe is a perfect reminder of how well known it was as a racing brand. The perfect blue is a striking color that you just can’t miss be it on the open road or on the freeway. This is what makes the sports series so majestic and smooth with its color and style.

With an ever wider variety of car paint colors available all across the globe for your ride, which one could you possibly choose? Keep your eyes on the road and you might just realize the color that you’ve craved all along. Read more here in our article about choosing the right automotive paint color for your car.

Further Reading:

Important Things To Know About Auto Painting

by Blog Joseph
DIY Car Painting Tips


There is never a better time than now to start undertaking do-it-yourself DIY car painting projects, especially ones that you have never had the time to try before! If you are a car, truck, or motorcycle enthusiast, like the many other vehicle lovers out there, maybe one of the things you can do is to give your ride a fresh look. If that sounds like something you would be interested in doing, stay tuned because we have some important things you ought to know about auto painting before you begin.

Re-painting your vehicle will enhance its appearance, cover up any small blemishes you may have accumulated, and have it looking brand new in no time. However, if you are new to the auto-painting process, there are a number of important things you need to know before you can start. You can either conduct your own research, talk to your local car enthusiast group, ask for the help of a painting professional, or wing it. Regardless of which method you choose, knowing some key pieces of information about the painting process will go a long way in preventing mistakes, getting clean lines, and creating a vehicle that you can be proud of.

All of this knowledge will help you from ruining the hours of time you spent meticulously laboring over your vehicle, which can make your sparkling beauty into a disheveled beast. So without further ado, let’s gloss over some important things you’ll want to know about auto painting!

Read More: 9 Crucial Tips to Remember for Painting Your Car

The Paint

Knowing what paint to buy is crucial in getting the outcome you want when attempting to change your vehicle’s color. While there are numerous types of auto paint that have come and gone throughout the years, most car enthusiasts and paint professionals today prefer urethane or the two-step acrylic enamel paints over the over paint type variations.

Urethane and acrylic enamel have higher viscosity when compared to lacquer paint styles, even when applied in the same method. Usually, a mixture of 1 part primer to 1 or 1/2 part thinner is already enough to give you that beautiful color you were aiming for. As a result, you will need fewer coats of paint to complete your project when using urethane or acrylic enamel styles of paint instead a lacquer style of paint. Lacquer paints can often require 20 or more coats of paint to get a similar outcome. Most of the time, two or three coatings of base color and three topcoats of clear will do the job. If you still have serious doubts about your paint choice, you can ask the help of a professional in your community to give you some pointers.

It’s also important to mention that color at this point as well. You don’t want to spend all your time painting just to find out at the end that you don’t like the color you chose. Make sure to get an automotive finish color chip chart so you know how your paint will look like in person rather than trying to interpret the true color over your phone or computer screen.

paint selection card

The Spray Gun

Just like lacquer paints, siphon spray guns are already things of the past. These high-pressure lines are no longer used mostly because of what they can contribute to the problem of pollution. Lawmakers have even banned their commercial use in many states.

Now, high-volume, low-pressure, or HVLP spray guns are being used in painting cars. These spray guns feature tanks located at the top of the mechanism. Gravity feeds the paint into the gun instead of siphoning it from the bottle found underneath the spray gun system as with the case of the old siphon spray guns.

Although the location of the paint tank of the newer HVLP spray guns might seem inconvenient for the user, they are known to be more efficient compared to the old spray gun models. They are known to deliver 80 percent of the paint to your car’s surface while only needing a line pressure of 10psi for its operation. This is definitely low compared to the 45 to 70psi needed by the siphon guns, which deliver a lowly 40 percent efficiency.

Read More: How to Paint a Car: 6 Professional Steps to Help Get You Started

Safety and Preparation

In painting your car, you also need to be concerned about your safety at all times. Because of this, you need to prepare not just the materials you need in making your car look brand new. You also have to prepare the things that will keep you safe during the entire painting process.

You need to buy yourself a complete paint suit to protect your clothing as well as your entire bodily system from the paint and other toxic materials you might be using. There are a number of cheap brands you can find in the market. You should also don on a respirator equipped with two air filters while you are painting. Pairing all these with gloves, goggles and some type of covering for your head will further keep you safe.

Your work area should also be kept clean at all times. You will achieve better efficiency with your endeavor if dirt and dust are kept away from your work. Just think how frustrating it can be if you will find just one small mistake in what could have been a perfect panel.

It is imperative to note that before you start painting your car, especially with the use of a spray gun, you should practice first. Using test panels and making sure that your spray gun is kept clean at all times will help ensure the success of your painting endeavor.

Gerson Blue Resperator

Read More: How to Care for a Fresh Car Paint Job

Final Thoughts On Some Important Things To Know About Auto Painting

Now that you know some of the key important things to know about auto painting, you can now get started on your project with the confidence you need in order to do a good job.

If you would like to know more about auto-painting, check out our other blog articles and don’t forget to take a look at our website for any and all of your auto painting needs.

Read More: Choosing the Right Automotive Paint Color for Your Car

Crucial Tips for Painting Your Car

If your antique car is showing signs of needing a new paint job, you’ll need to know all the important steps for a beautiful paint application that you’ll be proud of!

Painting a car can be a great experience for the DIY car painting enthusiast, but to do a good job you will need to pay attention to important tips that could help you do the job properly. Read more here in our article about DIY Car Painting Tips.

Here are 9 important tips for painting your car safely:

Crucial Tips to Remember for Painting Your Car

1. Always wear protective gear while painting a car

Don’t overlook this one!

It is not just your clothes that need protection during a paint job, but also your health. Paint and the other materials you will use in giving your car a new coat of paint may have toxic materials that could enter your system.

So for your safety, you should get yourself a paint suit, a respirator, goggles, and gloves. At Paint For Cars, we have everything you need for painting your car, including protective gear to keep you safe.

2. Make sure your paint booth is well-lighted, clean, and has the right temperature

Next, you should keep your spray booth or the area where you will be painting your car clean from dust and dirt at all times. It should also be well-lighted so you can see what you are doing clearly. It is imperative to check on the temperature of your work area as well.

This will affect not just the amount of paint and thinner you should use, but also the time it takes for the paint to dry between coats as well as the ultimate results.

Related: Car Paint Color Trends in Automotive Industry

3. Prep all your car panels

Cleanliness is a very important in any painting endeavor. You should clean your vehicle or all your car panels with soap and water as well as wax and grease remover to get rid of any debris, dust or dirt that could block your spray gun or mar your new paint.

You can also use a tack rag to wipe the surface of your panels or your car. Compressed air is needed to clean out complex car parts like the deck lid though. This is the only way you can get every last speck of dirt and drop of water.

You also need to prime and block-sand your vehicle or car panels with the use of a 600-grit paper before you can start painting them.

Read More: Important Things to Know About Auto Painting

4. Get ready with all the car painting materials

You will need a specialized table to hold the car parts in place during the painting process. It is best if you will cover this table with masking paper so that it won’t get a layer of paint that it doesn’t need.

You can also get such things as plugs to ensure that threaded inserts are kept clean while you are painting. These plugs will also make sure that these inserts won’t get any primer or paint in them.

5. Stir up the paint 

When you are already in the process of DIY painting your car, never forget to stir up the paint. Remember that as time passes, a lot of the product you are using will get to the bottom of the spray gun’s tank.

So, to make sure that your paint’s viscosity is maintained, stir it up often and thoroughly.

Related: What is Automotive Paint Made Of?

6. Don’t forget the paint filters!

You should also see to it that the paint is filtered as it goes into the reservoir of your paint gun. Although paint filters are standardized, you should take note of the type of gun you are using for your paint job.

It is preferred that you use a high-volume, low-pressure spray gun though for higher efficiency.

7. Ask a paint professional which nozzle you should use

The inner fittings of the nozzles of spray guns are adjustable. They are changed according to the type of paint you are using for a project. To ensure that you are using the right kind, ask your paint supplier or a paint professional which is the right one suited for the paint you prefer.

Check out all our car paint supplies here to find the correct items for your car painting project.

8. Maintain proper distance between vehicle and your spray gun

Make sure that your spray gun is as far as 18 inches or farther from your vehicle or your car panel while you are painting. You can test the distance between your panel or your vehicle and your gun before you start painting to make sure that everything is what you wanted.

As soon as you notice your spray gun spitting, you should stop immediately. Clean your gun’s nozzle with acetone before you start painting again. You should also make sure never to touch your gun to your freshly painted vehicle or panel.

Failure to do so will require for you to go through the tedious process of letting the wet paint dry and sanding out the marred area before you can repair it.

Read More: Auto Paint Application Methods

Spraying Car White

9. If in doubt about painting your car, always ask questions!

Remember that asking questions is never bad. If you are not sure about something that has got to do with your paint job, you should consult with paint professionals. At Paint for Cars, we are happy to assist you with choosing the right paint finish for your car, proper paint application, and more.

This will prevent you from making mistakes with your paint job and will save you the time and money in possibly doing things all over again.

Our Paint Products

Paint For Cars is proud to provide a wide range of colors and types of car paint. In fact, we have over 39 colors available in the following styles: Acrylic Enamel Auto Paint – Starfire Gallons, Acrylic Urethane Auto Paint – Starfire Gallons, Acrylic Urethane Paint Basecoat – Starfire Gallons (auto paint gallons); and single stage Acrylic Enamel Auto Paint Kits – Starfire, Acrylic Urethane Auto Paint Kits – Starfire, Acrylic Urethane Auto Paint Kits – Flat or Satin Finish, and Acrylic Urethane Auto Paint Kits – High Gloss – Xtreme.

Our two-stage paint products include our Acrylic Urethane Basecoat + TCI Clearcoat (good), Acrylic Urethane Basecoat + Starfire Clear (better), and Acrylic Urethane Basecoat + TCI Clearcoat (premium).

Contact Us for Car Painting Tips!

We’ve been providing our customers with auto paint gallons, single stage kits, two stage kits, and auto paint supplies since we first opened in 1998. Contact Paint for Cars for more information and helpful tips for how to paint a car and how to care for your car following a paint job.

 

Further Reading: