A flawless paint job can transform your vehicle—but even experienced DIYers can run into issues like runs, orange peel, fisheyes, or dry spray. The good news? Most common paint flaws can be corrected with the right techniques and quality materials.
Fixing Runs and Sags
Runs typically happen when too much paint is applied in one area. Allow the paint to fully cure, then carefully level the run using fine-grit wet sandpaper (such as 1500–2000 grit). Follow up with polishing compound to restore gloss. To prevent future runs, apply medium-wet coats and maintain consistent gun distance and speed.
Eliminating Orange Peel
Orange peel—when the surface resembles the skin of an orange—is often caused by improper spray gun settings, incorrect reducer choice, or spraying in poor temperature conditions. Wet sanding with 1500–3000 grit sandpaper and machine polishing can level the texture. For prevention, ensure proper paint mixing ratios and correct air pressure.
Correcting Fisheyes and Contamination
Fisheyes appear as small craters caused by surface contamination like silicone or oil. Thorough surface prep is critical. Use wax and grease remover before spraying, and consider a fisheye eliminator additive if needed.
Avoiding Dry Spray and Rough Finish
Dry spray happens when paint partially dries before hitting the surface. Adjust your spray distance, overlap passes correctly, and verify reducer speed matches your shop temperature.
Whether you’re repairing a flaw or starting fresh, PaintForCars.com has everything you need—from high-quality basecoat and clearcoat systems to primers, reducers, sandpaper, and polishing compounds. With the right products and expert guidance, you can correct imperfections and achieve a smooth, professional-grade finish every time.
